Adlink cBP-3204[R] User Manual

NuIPC cPCIS-1000/2000 Series: 3U CompactPCI Sub-systems and Components User’s Guide Recycled Paper

iv • How to Use This Manual How to Use This Manual This manual is designed to help you use the cPCI-2000/1000 Series 3U CompactPCI Sub-system. It is d

Introduction • 1 1 Introduction This users manual gives you the following information about the cPCI-2000 series 3U CompactPCI sub-systems, including

2 • Introduction • cBP-3200 Series: 3U 32-bit CompactPCI backplane with rear I/O • cBP-3052/3051: Backplane for single/dual 31-pin 3U redundant po

Chassis • 3 2 Chassis In this chapter, we will describe the detail features and specifications of the cPCIS-1000 and cPCIS-2000 chassis. Other mechani

4 • Chassis 2.1.2 Mechanical Drawing 2.1.3 Specifications u Dimension: 444.2(W) mm x 177(H) mm x 257.9(D) mm Note : 1. Width is 482.6 mm (19”)

Chassis • 5 • Current control of the FAN to provide stable fan operation • Fan failure detection ready to use • Power input connector (CN101) Pin #

6 • Chassis 2.2 cPCIS-1000 Chassis 2.2.1 Specifications u 19” rack-mount 3U in height, 21-slot CompactPCI card cage u Need external fan for coo

Chassis • 7 2.3 3U Power Supply Frame cPCI-PSF 2.3.1 Introductions The cPCI-PSF is a power supply frame, which is designed for holding the PS2 size

8 • Chassis 2.4 3U Drive Bay Frame cPCI-DBF 2.4.1 Introductions The cPCI-DBF is a drive bay frame, which is designed for holding the FDD, HDD or CD

Power Supply Unit • 9 3 Power Supply Unit The power supply unit in the 3U CompactPCI system is with modular design. The users can chose the most suit

This user’s manual includes the information for the following products range: Sub-systems: (Single System with LCD) • cPCIS-2150: 3U CompactPCI Platf

10 • Power Supply Unit 3.1 cPS-150R 3.1.1 Introduction cPS-150R is a redundant power supply which designed for CompactPCI standard industrial com

Power Supply Unit • 11 3.1.3 Installation After inserting cPS-150R to a standard 3U CompactPCI system or the standard 6U CompactPCI system, you can

12 • Power Supply Unit Ripple voltage +5V... 1.0 % p-p +3.3V... 1.5 % p-p +12V... 1.0 % p-p -12V ... 1.0 %

Power Supply Unit • 13 meets EN55022 Class A EMS:EN 50082-2 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-6 EN61000-4-8 ENV 50204 Impact & vibrati

14 • Power Supply Unit 3.1.5 Connector Pin Assignments Pin # (1) Staging (2) Mnemonic Description Column A A13 EL SP Spare A14 EL INH# Inh

Power Supply Unit • 15 Definitions of Pin Signals Signal Definition INH# Inhibit signal MAY be used to “turn off” the power supply outputs. This sig

16 • Power Supply Unit Caution: Improperly connected 5S+ and 5S- leads may damage the power supply.

Power Supply Unit • 17 3.2 cPS-175 Series Power Supply Unit 3.2.1 Introduction cPS-175 series products are a power supply designed for CompactPCI s

18 • Power Supply Unit There are two external warning LEDs. POWER: The Power LED is lit green if the AC or DC external power input power has been tu

Power Supply Unit • 19 Temperature Coefficient 0.05% / °C Protection 1. All outputs protected against overload and short circuit. Straightline curr

u LCD Kit: • cPCI-LCD: High brightness 6.4” LCD Kit u Mechanical parts: • cPCI-PSF: Power supply frame for holding PS2-size power supply • cPCI

20 • Power Supply Unit Operating Area 0 10 20 30 40 50 60 70 Ambient °C 100500 forced air 15 cfm

Power Supply Unit • 21 3.2.3 Connector Pin Assignments The Type of Connector Pin Signals Pin# Signal Name Pin# Signal Name 1

22 • Power Supply Unit Definitions of Pin Signals Signal Definition EN# Enable signal should be used to "turn on" the power supply output

Power Supply Unit • 23 input for DC input power supplies. Front panel keying is provided to prevent damaging an AC power supply inserted into a backpl

24 • Power Supply Unit 3.3 APS-925AX: 280 ATX Power Supply 3.3.1 Introductions The APS-925AX switching power supply is ideal for use in ATX compute

Power Supply Unit • 25 Line regulation The output line regulation for each output is less than +-1% while measuring at rated load and +-10% of 115VAC

26 • Power Supply Unit • Operating temperature: 0°C to 70°C When the ambient temperature is over 40°C (115V/230V) , the output power should be de-ra

Backplane • 27 4 3U Backplane In this chapter, specifications of many 3U backplane options will be included: • cBP-3400 series: 64-bit 3U CompactPCI

28 • Backplane 4.1 cBP-3400 Series 4.1.1 Features u CompactPCI PICMG 2.0 R2.1 compliant u Support 3U, 64-bit CompactPCI bus on P1 and P2, suppo

Backplane • 29 4.1.3 PCB Drawing 4.1.4 Specifications u Compliant to CompactPCI PICMG 2.0 R2.1 specifications u Standard 3U

30 • Backplane u CN1: Standard ATX DC Power input connector Signal Pin No. Pin No. Signal +3.3V 1 11 +3.3V +3.3V 2 12 -12V GND 3 13 GND +

Backplane • 31 Signal Pin No. Pin No. Signal GND 1 2 +5V GND 3 4 DEG# GND 5 6 FAL# GND 7 8 INH# GND 9 10 PRST# GND 11 12 +5V GND

32 • Backplane 4.2 cBP-3100 Series The cBP-3100 series products are with the same PCBs as the cBP-3400 series products. The only difference is that

Backplane • 33 4.3 cBP-3200 Series 4.3.1 Features u Compliant to CompactPCI PICMG 2.0 R2.1 specifications u Support standard 3U form factor u

34 • Backplane 4.3.3 PCB Drawing cBP-3208: R 1 7 1 sys 6 5 4 3 2 1 7 2 3 4 5 6 7 8 1 2 3 4 5 6

Backplane • 35 cBP-3208R:with P2 rear I/O 4.3.4 Connectors pin assignments u P1 & P2 of system slot: Standard 32-bit Compa

36 • Backplane Signal Pin No. Pin No. Signal +3.3V 1 11 +3.3V +3.3V 2 12 -12V GND 3 13 GND +5V 4 14 INH# GND 5 15 GND +5V 6 16 +5

Backplane • 37 u JP7 +12V Sense: +12V Sense Jumper Pin # Name 1 From pin #18 of CN1/CN2 JP7 2 Connect to +12V Sense When the normal ATX power su

38 • Backplane 4.4 cBP-3052E Backplane 4.4.1 Specifications u Compliant with 31-pin CompactPCI power standard of PICMG 2.11 u Support two 3U re

Backplane • 39 Note: Pin #8, #9, and #18 are not standard ATX power definition. u CN5: Screw terminals for external AC input power lines u CN7: Sc

Copyright 2000 ADLINK Technology Inc. All Rights Reserved. Manual Rev. 1.02: August 30, 2000 The information in this document is subject to chang

40 • Backplane 4.5 cBP-3051 4.5.1 Specifications u Compliant with 31-pin CompactPCI power standard of PICMG 2.11 u Support one 3U plug-in powe

Backplane • 41 Note : Pin #8, #9, and #18 are not standard ATX power definition. u CN5: AC power lines (include AC LINE, AC NEUTRAL, Chassis GND) u

42 • Backplane 4.6 cBP-3062 Backplane 4.6.1 Specifications u Compliant with 47-pin CompactPCI power standard of PICMG 2.11 u Support two 3U re

Backplane • 43 u CN104 extended connector for power sharing Signal Pin No. Pin No. Signal V2SENSE 1 11 V2 V2 2 12 V4 GND 3 13 GND V1 4 1

44 • LCD Kit 5 LCD Kit 5.1 Features u High Brightness 6.4 inches TFT LCD u Modular design for easy mounting on any 3U CompactPCI Chassis u Int

LCD Kit • 45 5.3 Specifications u Dimension: 3U height x 10-slot (40HP) width u Screen Size: 6.4 inches (diagonal) u Resolution: 640 x 480 x 18

46 • LCD Kit 5.4 Connectors Pin Assignment LCD Signal Connector on the LCD Pin # Symbol Function Pin # Symbol Function 1 GND Ground 17 G4

LCD Kit • 47 LCD Signal Extension Connector for cPCI-8217 Signal Name Pin # Pin # Signal Name +12V 1 2 +12V GND 3 4 GND +5V

48 • cPCIS-2000 Series Sub-systems 6 cPCIS-2000 Sub-systems The following sub-system’s configuration will be listed in this chapter. Sub-systems: (Si

cPCIS-2000 Series Sub-systems • 49 6.1 cPCIS-2150 Series • cPCIS-2150 is without rear I/O connectors • cPCIS-2150R is with rear I/O connectors 6.1.

Getting service from ADLINK u Customer Satisfaction is always the most important thing for ADLINK Tech Inc. If you need any help or service, please

50 • cPCIS-2000 Series Sub-systems 6.1.3 Ordering Options To complete the system to work, you should order an optional LCD controller card: u cPCI

cPCIS-2000 Series Sub-systems • 51 6.2 cPCIS-2151 Series 6.2.1 Features • Standard 19” 3U CompactPCI form factor, 4U in height • Attached high bri

52 • cPCIS-2000 Series Sub-systems The slot-panels with EMC gasket for the front or rear I/O cards are optional and not installed with this sub-syste

cPCIS-2000 Series Sub-systems • 53 6.3 cPCIS-2100 Series • cPCIS-2100 is without rear I/O connectors • cPCIS-2100R is with rear I/O connectors 6.3.

54 • cPCIS-2000 Series Sub-systems 6.3.3 Ordering Options To complete the system to work, you should order an optional ATX power supply: u APS-92

cPCIS-2000 Series Sub-systems • 55 6.4 cPCIS-2102 Series 6.4.1 Features • Standard 19” 3U CompactPCI form factor, 4U in height • Attached Two cPS-

56 • cPCIS-2000 Series Sub-systems u cPCI-SP3E: 3U slot-panel with EMC gasket for both front I/O or rear I/O

cPCIS-2000 Series Sub-systems • 57 6.5 cPCIS-2152 Series 6.5.1 Features • Standard 19” 3U CompactPCI form factor, 4U in height • Attached high bri

58 • cPCIS-2000 Series Sub-systems u cPCI-8217: LCD controller card with SMI chipset (embedded 4MB RAM) You may specify to use cPS-175 series power

cPCIS-1000 Series Sub-systems • 59 7 cPCIS-1000 Sub-systems The following sub-system’s configuration will be listed in this chapter. Sub-systems: (Sin

Table of Contents • i Table of Contents How to Use This Manual...iv Chapter 1 Introduction ...

60 • cPCIS-1000 Series Sub-systems 7.1 cPCIS-1151 7.1.1 Features • Standard 19” 3U CompactPCI form factor, 3U in height • Attached high brightnes

cPCIS-1000 Series Sub-systems • 61 7.2 cPCIS-1100 Series • cPCIS-1100 is without rear I/O connectors • cPCIS-1100R is with rear I/O connectors 7.2.

62 • cPCIS-1000 Series Sub-systems You can also fit any standard PS2 sized power supply into the controller. The slot-panels with EMC gasket for the

cPCIS-1000 Series Sub-systems • 63 7.3 cPCIS-1250 7.3.1 Features • Standard 19” 3U CompactPCI form factor, 3U in height • Dual systems in one syst

64 • Product Warranty and Service Product Warranty/Service Seller warrants that equipment furnished will be free form defects in material and workman

ii • Table of Contents Chapter 4 3U Backplane....28 4.1 cBP-3400 Series...

Table of Contents • iii 6.3.2 Configurations..................54 6.3.3 Ordering Options ...