Adlink CoreModule 920 User Manual download pdf (Page 37)

Chapter 3 Hardware

CoreModule 920 Reference Manual 31

Note: The shaded table cells denote power or ground.

Power Interface

The CoreModule 920 requires one +5 volt DC power source and provides a shrouded 10-pin, right-angle

header with 2 rows, odd/even pin sequence (1, 2), and 0.100" (2.54mm) pitch.

The power input header (J24) supplies the following voltage and ground directly to the module:

• 4.75VDC - 5.0VDC +/- 5%

Note: The shaded table cells denote power or ground.

13 LVDSA_DAT0_P LVDS A DATA Positive Line 0

14 LVDSA_DAT0_N LVDS A DATA Negative Line 0

15 LBKLT_CTL Panel Backlight Control

16 LVDD_EN Enable Panel Power

17 LDDC_CLK Display Data Channel Clock

18 LDDC_DATA Display Data Channel Data

19 LBKLT_EN Enable Backlight Inverter

20 NC Not Connected

Table 3-12. Power Interface Pin Signals (J24)

Pin Signal Descriptions

GND Ground

+5V +5 Volts

GND Ground

+12V +12 Volts routed to PC/104, PC/104-Plus, and LVDS interfaces

GND Ground

+3.3V_PCI +3.3 Volts routed to PCI

GND Ground

+5V +5 Volts

9 GND Ground

+5V +5 Volts

Table 3-11. LVDS Video Interface Pin Signals (J23) (Continued)

Pin # Signal Description

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 63 64

No comments

Adlink CoreModule 920 User Manual Page 37