Adlink LEC-iMX6 User Manual download pdf (Page 14)

10 Hardware

2 Hardware

2.1 CPU

The LEC-iMX6 product family offers four models of the Freescale™ i.MX6 CPU: the i.MX 6Solo

(1x Core), the i.MX 6Dual (2x Core), the i.MX 6DualLite (2x Core, single-display, no SATA), and

the i.MX 6Quad (4x Core). i.MX6 CPUs feature 64-bit/32-bit ARM Cortex-A9 processor cores

built on 40-nanometer process technology. The CPUs are designed for one-chip platforms, all

using the same package, and are pin compatible. Refer to the CPU data sheet and reference

manual at:

http://www.freescale.com/webapp/sps/site/taxonomy.jsp?code=IMX6X_SERIES.

2.2 Memory

The LEC-iMX6 employs one channel of 64-bit DDR3L on-board memory. Four SDRAM memory

chips provide up to 16Gb of non-ECC, unbuffered, low voltage system memory. Refer to the

SDRAM datasheet at:

http://www.micron.com/parts/dram/ddr3-sdram/mt41k256m16ha-125-it

2.3 eMMC NAND Flash

The module supports an optional on-board eMMC (Multi-Media Card) NAND chip with capacity

up to 64GB and can be used as the Boot device.The data signals are routed from the NAND

chip through the SDMMC pins on the SMARC connector. If the optional eMMC NAND chip is

present on the module, the eMMC interface will not be available for the baseboard on the

SMARC connector. Refer to the NAND Flash datasheet at:

http://www.micron.com/parts/nand-flash/managed-nand/mtfc8gldea-4m-it

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

No comments

Adlink LEC-iMX6 User Manual Page 14