Adlink NuPRO-E340 User Manual download pdf (Page 21)

Introduction 7

NuPRO-E340

Serial ATA

The NuPRO-E340 provides six Serial ATA ports with data transfer

rates of up to 6.0 GB/s on 2 ports and up to 3.0 GB/s on 4 ports.

Intel® Rapid Storage Technology supports AHCI and RAID

0/1/5/10 functionality.

Universal Serial Bus (USB 2.0/3.0)

The NuPRO-E340 provides 12 USB 2.0 ports supporting transfer

rates up to 480 Mb/s and two USB 3.0 ports on the rear panel I/O

supporting transfer rates up to 5 Gb/s (ASM1042 controller via

PCIe). All ports are USB 2.0/1.1 compatible.

Hardware monitoring

A built-in, proactive hardware monitoring system in the Super I/O

monitors the CPU temperature, system fan speed, and voltage

levels to prevent overheating and/or component damage, effect

timely failure detection, and ensure stable supply of current for

critical components.

Watchdog Timer

The watchdog timer (WDT) monitors system operations based on

user-defined configurations. The WDT can be programmed for dif-

ferent time-out periods, such as from 1 to 255 seconds or from 1 to

255 minutes. The WDT generates a reset signal, then a reset

request, after failure to strobe it within the programmed time

period. A register bit may be enabled to indicate if the watchdog

timer caused the reset event. The WDT register is cleared during

the power-on sequence to enable the operating system to take

appropriate action when the watchdog generates a reboot.

Trusted Platform Module

The NuPRO-E340 optionally supports TPM ver. 1.2 (Trusted Plat-

form Module) for secure storage of keys, passwords and digital

NOTE:

The USB 3.0 ports cannot be used to install Windows as the

necessary drivers are currently not included with the OS. Linux

kernels 2.6.31 and higher can be installed using the USB 3.0

ports.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 101 102

No comments

Adlink NuPRO-E340 User Manual Page 21