Adlink NuPRO-E340 User Manual download pdf (Page 45)

Driver Installation 31

NuPRO-E340

4 Driver Installation

This chapter provides information on how to install the

NuPRO-E340 device drivers under Windows XP. The device

drivers are located in the following ADLINK All-in-One DVD

directories:

Install the Windows operating system before installing any driver.

Most standard I/O device drivers are installed during Windows

installation.

4.1 Intel® Rapid Storage Technology Driver

1. Create a floppy image as described in the F6Readme.txt file

contained in X:\NuPRO\NuPRO-E340\Others\

F6_SATA_Floppy_Install_Image_WinXP32_WinVISTA32_

IRST 9.5.0.1037.zip.

2. During Windows installation, press F6 when you see the

message “Press F6 if you need to install a third party

SCSI or RAID driver.” Then press S to Specify Additional

Device.

Chipset \NuPRO\NuPRO-E340\Chipset\

Display \NuPRO\NuPRO-E340\VGA\

Ethernet \NuPRO\NuPRO-E340\Ethernet\

TPM \NuPRO\NuPRO-E340\TPM\

.Net Framework \NuPRO\NuPRO-E340\VGA\

Rapid Storage \NuPRO\NuPRO-E340\Others\

USB 3.0 \NuPRO\NuPRO-E340\Others\

Audio \Audio Daughter Board\DB-Audio2\

NOTE:

The USB 3.0 ports cannot be used to install Windows as the nec-

essary drivers are currently not included with the OS. Linux kernels

2.6.31 and higher can be installed using the USB 3.0 ports.

NOTE:

In order to enable RAID or AHCI mode, you must pre-install the

Intel® Rapid Storage Technology driver during the Windows*

installation process. using the F6 installation method.

*Not required for Windows Vista and Windows 7.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 101 102

No comments

Adlink NuPRO-E340 User Manual Page 45