Adlink USB-1210 User Manual download pdf (Page 28)

18 Getting Started

Figure 2-5: Module with Wall Mount Apparatus

2.5 Installing the USB-1210 Module

2.5.1 Connecting the USB-1210 Module

1. Turn on your computer.

2. Connect the USB-1210 module to one USB 2.0 port on

your computer using the included USB cable.

3. The first time the USB-1210 module is connected, a New

Hardware message appears. It will take around 6 sec-

onds to load the firmware. When loading is complete, the

LED indicator on the rear of the USB DAQ module

changes from amber to green and the New Hardware

message closes.

4. The USB-1210 module can now be located in the hard-

ware Device Manager, listed as ADLINK USBDAQ 1210

Device as shown.

WARNING:

The appropriate driver must be installed before you can con-

nect the USB DAQ to your computer system. Refer to

Section 1.9: Driver Support for Windows for driver support

information.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 53 54

No comments

Adlink USB-1210 User Manual Page 28